Hanging Instructions

Wallcovering Hanging Instructions Please read these instructions carefully before hanging  this wallcovering. It is advisable that a professional decorator is used. 


-Walls should be dry, clean and even. 

-Remove any old wallpaper and loose paint. 

-Roughen painted surfaces with sandpaper. 

-For best results we recommend that walls are cross lined using a good quality lining  paper. Sizing the lining paper will aid adhesion. 

Lining should be allowed to dry out completely before hanging the wallcovering.

Pasting and Hanging 

-This is a paste the wall product. The decorator should paste the wall and not the back of the  wallcovering. 

-A good quality, solvent free, fungicide protected ready-mixed ‘tub’ adhesive should be  used. 

-Paste should be evenly applied to the wall to hang one length at a time, to an area slightly  wider than width of the paper. 

-Butt joints and use a decorators brush to smooth down the wallcovering, working from the  centre to the edges to express air bubbles. 

-Avoid squeezing paste out of the joints and ensure paste does not get onto the brush or  roller. 

-No paste should be allowed to come into contact with the surface and hands should be  kept clean and dry whilst hanging the wallcovering. 

-Paste will damage the surface. The company cannot accept responsibility for marks or  damage caused by paste. 

-Should any paste have been allowed to come into contact with the surface, it should be  lightly sponged whilst still moist, using a clean damp sponge. 

-This information has been supplied in good faith, but without guarantee. Site conditions are  beyond our control. It is the responsibility of the buyer to ensure that the environment is  suitable for the wallcovering.